Skip to product information
Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
1/9
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
  • Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
Solenoid point motor switch mounting kit (Peco PL13 / PL15 equivalent)
£4.95
Size
Number

This switch mounting plate comes ready assembled to glue to the bottom of any standard Peco or Hornby solenoid point motor to provide either one or two microswitches which operate with the position of the point.

Available with either one microswitch (equivalent to Peco PL-13) or two microswitches (equivalent to Peco PL-15)

Fitted with screw terminal plugs and sockets for easy wiring.

On an analogue layout you would typically use one microswitch to operate a pair of LED's on your mimic control panel.

On a digital (DCC) layout you might use one microswitch for the mimic LED's and the other for controlling the frog on the electrofrog point.

Both microswitches are independent and can be used for any application.

Use with HobbyTrax mounting plates for an easy under-board fixing and wiring solution!

Comes complete with full instructions and example wiring diagrams for all typical applications.

Microswitch contacts are rated at 125VDC at 1A and are single pole change-over (SPDT)

Available in packs of 1, 5 or 10.

Note plastic colour may vary. Solenoid point motor and mimic LED's not included.