🛸 LV426Designs – Premium Resin Miniature (Unpainted Physical Model)

⚠️ IMPORTANT — PLEASE READ
All models in this listing are unpainted, DIY resin kits.
They may require assembly, sanding/filing, support removal, priming, and painting.
Models are not supplied painted unless the listing title clearly states “Pre-Painted.”

✅ What You Will Receive

1 unpainted resin miniature (physical model – no STL files supplied)
Printed at your selected scale (28mm / 32mm / 75mm — see scale explanation below)
If a base is shown in the listing photos, that exact base is included
Models with delicate or breakable parts are shipped with supports attached for protection

🎮 Ideal for tabletop gaming, sci-fi RPGs, wargaming proxies, painting projects, and collectors.

📏 Understanding Miniature Scale (28mm / 32mm / 75mm)

Miniature scale refers to the height of an average human figure standing upright:

28mm scale → ~28mm from foot to eye level
32mm scale → ~32mm from foot to eye level
75mm scale → large display / collector scale

Scale does not refer to the base size.
Base size varies depending on the sculpt and what is pictured.

🛠 Support Removal – Safe, Easy Method (Recommended)

Delicate models ship with supports attached to prevent breakages.
These are very easy to remove safely:

Turn on your hot water tap and let it run until hot but not painful.
Hold the area where the supports meet the model under the hot water for 2–3 seconds.
The supports will soften immediately and can be peeled away like butter.
For tiny areas such as fingers or tails, snip around the support structure first.
Then gently pinch the end of the support with tweezers or cutters to separate it without twisting.

This method massively reduces the risk of damage.

🛠 Assembly & Model Preparation

These are high-detail resin miniatures, so some light hobby prep may be required:

Snip or soften supports as above
Sand or file contact points if needed
Assemble with superglue (cyanoacrylate)
Prime before painting for best results
Large multipart kits may need gap filler (Milliput / Green Stuff)

🧼 Resin Handling Note

During post-processing, I use cleaning and curing substances that may occasionally leave a slight sticky residue on the surface.

This is harmless and easily removed with:
✔️ Warm soapy water, or
✔️ Make-up remover wipes

No additional treatment is required.

🧽 Post-Processing Quality

Every model is professionally finished:

✔️ Washed in isopropyl alcohol
✔️ Rinsed in hot water
✔️ Fully UV-cured
✔️ Inspected before packing

Supports are only left on when doing so protects fragile areas.

📦 Shipping & Packaging

✔️ Fast dispatch from the UK
✔️ Securely wrapped in protective plastic + cushioned with packaging
✔️ Shipped in sturdy boxes
✔️ Tracked options available
✔️ Extra processing time may apply for models over 100mm or bulk orders

International buyers: eBay will calculate/import taxes where applicable.

🌟 Why Choose LV426Designs?

✔️ Trusted UK workshop with thousands of happy customers
✔️ High-end printers (Elegoo Saturn 4 Ultra 16K) for crisp detail
✔️ Hobbyist-run: careful orientation, supports, and curing
✔️ Packaged safely for long-distance travel
✔️ Helpful communication & fast resolution of issues

🧾 Licensing & Attribution

This model was created by Papsikels Miniatures and is sold under official commercial license.
LV426Designs is an authorised seller of physical models only.
Digital files (STLs) are never included.